Prep Assembly Station

The Preparation Assembly Station has the following functions and features for Digital Conversion.

• In order to realize the digital transformation, data communication and interaction must be provided between the station and the operator and between the ERP and IOT. A system called HMI should be used to ensure this interaction.
• The software running on the HMI should be able to communicate with Modbus RTU / TCP / ASC, Profinet protocols using Ethernet / RS485 / RS232 interfaces.
• In the preparation assembly station, light guidance should be provided so that the operator can select the right product at the right time, from the right place, in the right quantity and in the right order.

• There should be body or product holding apparatus (fixtures) specially designed for the product to be mounted on the station.
• There should be a specially designed storage box for the special parts of the variations of the product assembled at the station.
• Data must be transferred from the preparation assembly station and the equipment mentioned above to the ERP software.
• The preparatory assembly station must have electric drill equipment.
• The data to be transferred from the station to the IOT software, the minimum standard data list required to follow the process in that machine is as follows