It gets its carrying power from an electric motor that drives a flexible and endless band made of plastic and derivative materials placed between the drive drum and the tensioning drum. Transport distance, load, motor power, belt tension are the determining factors in the design phase.
It gets its carrying power from an electric motor that drives a flexible and endless band made of plastic and derivative materials placed between the drive drum and the tensioning drum. Transport distance, load, motor power, belt tension are the determining factors in the design phase.
While the load is moving on the conveyor in the conveyor, the dimensional accuracy of the materials in the cartridge is made by the stereo camera integrated into the system.
Principle of Operation; The motor controller circuit applies the commands it receives from the IMA to the motor. When a sensor at the entrance of the conveyor detects that the product is placed, it is used to initiate the movement in coordination with the work order received by the IMA. Located in the middle of the conveyor; For example, the camera measurement system works interactively by communicating with the conveyor motor controller circuit. When it completes its process, it starts the movement again and directs the product towards the end. If a sensor at the end of the conveyor detects the product, it is used to stop the movement or to trigger the next process so that the product is not damaged by falling.
| Features |
|---|
| Machine Length Dimensions must be at least 1300x800x2100 mm and above. |
| Weight must be at least 230 kg and above. |
| Engine speed is at least 1500 rpm. and above. |
| At least 3 points (input, middle, output) should have photoelectric sensors. |
| It should have a stereo camera to take the final image for quality control purposes. |